The History of Alpacas in the UK

A bag of Peruvian fibre posed a problem for Bradford’s spinners. Two centuries later, a UK keeper can follow a single fleece from the shearing table to a finished scarf.

Alpacas in a green paddock beside a dry-stone wall and a wooden gate
Illustration of a present-day Pennine paddock.

What arrived in Britain?

On 27 June 1835, the Bradford manufacturer Titus Salt wrote down a purchase of one bag of Peruvian wool. He and his assistants faced a practical problem. The imported alpaca fibre had the sheen they wanted, but they needed to spin it into a thread even enough to use on the loom. They also had to decide which part of the cloth that thread should form. An animal that Andean herders had raised for generations was entering a textile district organised around sheep’s wool, and the equipment already in the mills shaped what the spinners could make of it.

A live alpaca had already drawn a London audience. Historian Helen Cowie traces an alpaca at Edward Cross’s menagerie in 1811 to an animal formerly kept as a pet in Lima. That record tells us about exhibition and curiosity. Salt’s notebook tells us about a manufacturer buying material to work on. Taken together, the records show two ways alpaca entered British life within a generation.

For the much longer story of domestication and herding in South America, see the history of alpacas in the Andes. In Britain the two strands came together much later. A farm could finally raise the animals, supply the fibre and commission the yarn. The people doing that work faced some of the same questions that had occupied the Bradford spinners, starting with what a particular fleece was best suited to become.

How did Bradford turn it into cloth?

A worker handling loose fibre beside yarn spools in a window-lit mill
Historical interpretation of fibre handling in a West Yorkshire mill. The scene is an illustration.

The University of Bradford’s Special Collections holds Salt’s daybook from 1834 to 1837. Its entries bring the experiments down to the scale of a bag or a pack. One month in 1835 has an entry for ten bags. In October 1836 Salt noted two packs described as black and broken. Those descriptions mattered at the mill door. A buyer might know the origin under which material was sold, but workers still had to examine the lot in front of them and see what sort of thread it would make.

Salt had competition and predecessors. The Saltaire Collection recounts an earlier attempt by Benjamin Outram of Halifax that produced expensive cloth with little lustre. Salt’s assistants adapted machinery and spent more than a year on trials. An even yarn was a condition for making a reliable cloth. Getting there meant paying attention to how fibre was prepared, how steadily it could be fed through the machinery and how regularly it came off the spindles. A fault that seemed small in a single length of yarn could become conspicuous when repeated across a finished piece.

The construction of the cloth helped solve the problem. Warp threads run the length of the loom and stay under tension. Weft passes across them. Salt and his assistants used alpaca in the weft and, in the best-known version, cotton in the warp. Bradford’s archive also describes work with silk warps. Think of the cotton as the set of threads the weaver stretched first. The alpaca crossed it and contributed much of the surface sheen. A Victorian reference to alpaca cloth can therefore describe a woven fabric made with two kinds of yarn.

The Saltaire Collection dates early sales of the cloth to 1839. Making repeatable lengths for sale called for people who could judge the incoming fibre, keep spinning machinery running and turn bobbins of yarn into cloth with a consistent appearance. Dyeing was another part of the trial. The collection records Salt seeking out a dyer in Leeds. The people who did those jobs help explain how a promising experiment could become a line of fabric that buyers would order again.

Later, at Saltaire near Shipley in West Yorkshire, the geography of the business became part of the story. UNESCO’s listing takes in the textile mills, workers’ houses and public buildings together. Walking through the village gives a sense of how much space industrial textile making required beyond the machinery. People had to live near enough to work there, and the employer shaped the housing and institutions around the mill. The village survives as evidence of the scale of the operation and of the influence a textile employer could exercise outside working hours.

When did keeping alpacas become a breeding business?

The animal at Cross’s London menagerie was an attraction. It also gave observers a chance to see fleece growing on an alpaca, something an importer’s bale could tell them little about. As Cowie documents, later enthusiasts wanted to see whether the animals could be established in Britain and supply manufacturers from nearer home. The Scottish Highlands appeared in proposals because advocates imagined that upland conditions would suit animals from the Andes. Finding people to fund a trial and getting live animals through a long sea voyage were immediate hurdles.

Some keepers did get animals. Cowie describes Prince Albert keeping two at Windsor and the Stevenson family sending alpacas from Peru to Oban. Thomas Stevenson reported that only two survived from a shipment of twelve. For anyone hoping to build a breeding flock, a voyage like that could undo years of plans before the animals reached a field. The surviving accounts capture scattered attempts at keeping and breeding, alongside proposals that were much more ambitious than the results they produced.

Bozedown Alpacas supplies a much later account from the breeder’s side. The business dates its start to 1989 and describes surplus zoo animals as foundation stock for its own and several other early herds. It records a shipment of huacayas from Chile in 1995 and dates its own selection of Peruvian breeding stock to 1998. These are milestones in the history of modern breeding. A published herd account can tell us how one breeder assembled stock and what that breeder regarded as important. It leaves the ancestry of other herds to their own records.

A second modern date comes from Companies House. The British Alpaca Society was incorporated on 27 September 1996. Today its pedigree registry lets members look up animals by name or tag, check ancestry and record births and ownership transfers. A breeder selecting a mating can check how closely the animals are related. A buyer can follow the identity of an animal that has changed hands. The registry also gives owners a way to record animals kept for fibre or companionship, where the owner may have no plans to breed at all.

A farm can pair those identity records with what the keeper observes at shearing. If the fibre from a particular animal works well in a fine yarn, a labelled bag and a reliable identity record make it possible to recognise the next year’s fleece and compare it. The modern industry depends as much on keeping those ordinary records straight as on bringing in new breeding stock.

What does the record show?

Open any entry to see what the evidence can tell us.

27 June 1835 · TradeOne bag of Peruvian wool

Salt’s daybook records alpaca fibre among the materials he acquired while experimenting in Bradford. The purchase puts the raw fibre in a manufacturer’s hands by that date. The entry leaves the size of the wider import trade open.

1811 · Live animalAn alpaca at a London menagerie

Helen Cowie traces a live alpaca formerly kept in Lima to Edward Cross’s menagerie. Her account identifies the animal and the purpose for which it was exhibited. The account gives evidence for one animal and leaves earlier private arrivals uncertain.

27 September 1996 · Breeding industryThe British Alpaca Society’s company record

Companies House records the society’s incorporation under company number 03256068. The date belongs to the legal entity. Bozedown’s herd history supplies separate evidence for breeding activity before then.

What are alpacas kept for, and where do llamas fit?

Yes, some UK keepers have raised alpacas and llamas on the same property. Bardsea Alpacas and Llamas, near Ulverston in Cumbria, keeps both and offers booked encounters. On its walking experience, a visitor may be matched with an alpaca or a llama. The operator’s account establishes what guests can do with either species on one property. It gives little detail about how the animals are grouped for grazing throughout the year.

There is also a history of owners organising together. The British Llama Society traces its roots to British Camelids, formed in 1987 to represent people interested in several species, including alpacas and llamas. A shared organisation made sense for people keeping animals that were relatively unfamiliar in Britain. Its membership history speaks to the exchange of knowledge among keepers. Individual farm records and first-hand accounts are where we can learn which animals actually shared a field.

Alpacas at a farm gate with other livestock visible in the fields beyond
Illustration of a Welsh Marches farm with livestock in neighbouring paddocks.

Fibre gives a farm an annual job even when there are no young animals to sell. The British Alpaca Society says shearing typically takes place in spring or summer. Its shearing checklist gives a picture of what happens off the shearing mat. Someone books the shearer and a fallback date, counts the animals, plans the order and sets out labelled bags. If the keeper wants the pale fibre and dark fibre processed separately, the simplest place to preserve that choice is at the point where each fleece is collected. Short cuts and stray fibres become harder to remove after lots have been combined.

Breeding adds work of a different kind. The society’s guidance stresses observing a group regularly, because a keeper who knows how each animal behaves can pick up a change. The arrival of a cria, or young alpaca, adds observations to record and eventually an identity to enter in the herd book. At a fleece-focused farm, the same animal may be tracked from its first shearing through several seasons. That gives the keeper a better basis for judging the qualities of its adult fleece than a quick look at a youngster in the field.

Some owners keep alpacas primarily as companions, and some have bought animals for a stock-protection role. Bozedown mentions both markets in its account of the UK industry. Its account shows what buyers have sought from the animals and supplies no measure of predator control. Companionship also needs to be understood from the alpaca’s side. The British Alpaca Society advises keeping alpacas in groups of three or more, so a companion herd still takes a keeper’s time and regular attention.

For a business that offers walks, a different set of decisions is visible. Bardsea says it matches walkers to individual animals and limits spaces. A fleece buyer might notice colour and handle first. The person leading a walk is paying attention to an animal’s behaviour around people. A single farm can care about both qualities, and a booked encounter usually shows only a small part of the keeper’s work. Even when alpacas and llamas take turns on the same walking route, the relevant record is which animal joined the walk. The route tells us little about the farm’s breeding plans.

Loose cream fleece, grey yarn and purple knitwear on a wooden workbench
Illustration of fleece, spun yarn and knitwear at different stages of textile making.

How does a UK fleece become clothing?

Watership Alpacas describes a route that starts with fibre shorn from its own animals. A mill in Wales cards, spins and weaves it. A clothing manufacturer in Sheffield then cuts, sews and finishes the outerwear. The farm says it uses undyed fibre in its natural colours. That puts a decision made well before weaving on display in the finished fabric. The colour of a coat begins with the fleeces the grower sets aside for it, and the grower has to have enough suitable fibre for the cloth they want to order.

Between shearing and spinning comes a series of choices about what belongs in a batch. The Border Mill in Duns, in the Scottish Borders, asks clients to separate the blanket from the back and sides from other parts of the coat. Skirting is the work of taking away unsuitable edges and visibly contaminated sections. A fleece can have a clean, useful centre and edges tangled with grass or filled with coarse hairs. Sorting by colour or fibre quality gives the spinner material that is more consistent from one handful to the next.

The Border Mill describes further sorting, tumbling and washing before the fibre is prepared and spun. Carding opens and arranges the fibres so they can feed through later equipment. Drafting draws the prepared material thinner, and spinning adds the twist that holds it together as yarn. The operator can also ply several spun strands together. That choice affects the thickness of the yarn a knitter receives. In Duns a customer can send an individual fleece for processing. The University of Glasgow’s Fleece to Fashion project describes mill workers assessing each customer’s batch and choosing how to process it for the intended yarn.

Pooling fleeces changes what a grower can do. Stonebriggs Alpacas, outside Ulverston in Cumbria, says it breeds white animals partly because their fibre can be combined with coloured fleeces to make different yarn shades for knitwear. A run from one fleece can preserve that animal’s colour and identity. Blending several lots gives a maker more yarn to work with and lets the proportions determine the shade. If the maker expects to knit a jumper and wants all the panels to match, having enough yarn from the same batch matters.

The final step depends on what the maker is producing. A knitter forms the fabric from loops of yarn and can shape a sleeve by changing the stitch count. In Watership’s woven route, the loom produces cloth first and the Sheffield maker shapes it by cutting pattern pieces and sewing them together. Either route can begin with fleece from a UK herd. To follow a specific garment, find out where the fibre grew, where it was spun and where the finished piece was made. Each answer identifies a different contribution to the garment. The guide to alpaca clothing covers the types of knitwear and other garments those routes can produce.

Follow a fleece to the finished garment

Choose a stage to see what the grower, mill or maker decides.

Keep track of whose fleece it is

At shearing, the keeper can bag the blanket fleece from the back and sides separately. A name or tag number on the bag lets the mill keep that animal’s fleece identifiable if the owner orders an individual batch.

Choose the colour before the yarn exists

After skirting removes coarse or contaminated sections, the grower can keep similar shades together or mix colours deliberately. Stonebriggs uses white fleece with coloured fibre to produce different shades for knitwear.

Specify a yarn for the job

The Border Mill cards and drafts the fibres before spinning adds twist. The mill can ply strands together and adjust the finished yarn to suit the customer’s intended project.

Shape the garment

A knitter shapes a sleeve as the stitches are made. On Watership’s woven route, a Welsh mill makes flat cloth and a Sheffield clothing maker cuts the pieces before sewing them into outerwear.

Alpaca farms in the UK today

The right farm to contact depends on what you want to see. A breeder can explain the ages and backgrounds of the animals in a herd and may arrange a visit around a discussion of stock. At a fibre farm, a conversation might begin with this year’s yarn and which colours are available. A farm offering public walks will usually describe the route, the length of the session and when you can book. Some places combine these kinds of work and organise each one separately.

Stonebriggs Alpacas is one example of a working fibre farm that invites enquiries about visits. The owners ask people to email or phone to arrange a time to see the alpacas and try on knitwear. That gives a visitor a chance to connect what is growing in the field with what is on the rail. If you want to know about a particular jumper, it is a good setting to ask how the colour was produced and whether the farm still has yarn from that batch.

At Ballyburren in County Down, Northern Ireland, the offer is a timed alpaca trek booked online. Its experience page sets out who can hold a lead and who needs an accompanying adult. Those details help a family decide how to share the walk before reserving a place. A conversation about fibre at Stonebriggs and a timed trek at Ballyburren give visitors two different ways to spend time around a herd.

Explore alpaca farms in the UK

Sources and further reading